Go Back
+ servings
Kindle holder on table
Print
5 from 1 vote

How to Make a Kindle Holder for Your Paperwhite

Learn how to make a pretty DIY kindle holder for your paperwhite with this simple tutorial.
Prep Time30 minutes
Active Time30 minutes
Total Time1 hour
Course: DIY Projects
Yield: 1 Kindle Holder
Author: Patti Estep
Cost: $10-$15

Equipment

  • Fabric scissors
  • Sewing Machine

Materials

  • Fabric - 2 13-inch squares and 2 10-inch squares
  • Filler

Instructions

  • Cut the two smaller squares in half on the diagonal.
  • Fold and press over the long edge.
  • Sew the fold about 1/4 from the edge.
  • Place the four triangles on top of one of the larger squares. Pin in place.
  • Set your paperwhite in place and mark the corners with more pins.
  • Sew the triangles onto the larger square along the stitched lines.
  • Leave the area between the two pins marking the kindle corners open.
  • With the right sides together, place the 2nd large square fabric piece on top of the triangles.
  • Stitch around the entire edge leaving a 3 inch opening for turning.
  • Trim the excess fabric, and cut the corners. 
  • Turn right side out and press if needed.
  • Add the filling.
  • Hand sew up the opening.
Tried this project?Tag @hearthnvine on Instagram