Tape a piece of freezer paper that's much larger than your napkin, shiny side up, on a table.
Place your napkin in the center of the freezer paper and place a dot at the corners with a pen.
Remove the top layer of the
Mix some glue and water in a plastic cup with a skewer or spoon in a 2 to 1 ratio. Two parts glue to one part water.
Brush a layer of the glue and water mixture on the freezer paper just outside the dots and cover the entire area.
Prepare the napkin by removing the top printed layer from the two bottom layers.
Place the napkin on the glue, starting at the top edge and gently setting the rest on the glue.
Gently press out any wrinkles if desired.
Brush more of the glue and water mixture all over the top of the napkin, being sure to cover outside the edges.
Let the napkin sit for 24 hours.
Gently pick at one corner and slowly lift the napkin from the freezer paper.
Cut off any excess glue from the edges.