Go Back
Three memory wire bracelets.
Print

Making Memory Wire Bracelets

You can make beautiful memory wire bracelets with all kinds of beads and a few easy techniques by following this easy tutorial.
Prep Time5 minutes
Active Time1 hour
Total Time1 hour 5 minutes

Equipment

Materials

Instructions

  • Decide whether you want to make a single bracelet or cuff. Or a multi-strand memory bracelet.
  • Use the inner portion of the needle nose pliers to cut enough wire a little longer than your wrist measurement or as long as you want for the multi-strand wire bracelet.
  • Make a loop with the pliers at the end of the wire to keep the beads from falling off. Or place a small drop of glue and attach one bead to the end of the wire.
  • If using glue wait until it dries. Otherwise, start adding beads to the wire. Create a pattern if you like or simply thread enough beads on the wire until you are almost at the end.
  • Check the size on your wrist and use the pliers to cut and bend the end to close. Or cut to size and add another drop of glue to the end and add one last bead.
Tried this project?Tag @hearthnvine on Instagram